$ DeviceNet Electronic Data Sheet for JDB8

$

$ Created by: MM

$ Modified by: Fred Billock



[File]

	DescText = "1782 JDB8 EDS";

	CreateDate = 3-17-98;

	CreateTime = 12:00:00;

	ModDate = 12-22-1999;

	ModTime = 09:21:00;

	Revision = 1.31;



[Device]

	VendCode    = 9;                                  $ Vendor Code

	ProdType    = 7;                                  $ Product Type

	ProdCode    = 200;                                $ Product Code



	MajRev      = 1;                                  $ Major Rev

	MinRev      = 20;                                 $ Minor Rev

	VendName    = "Western Reserve Controls Inc.";

	ProdTypeStr = "General Purpose Discrete I/O";

	ProdName    = "1782-JDB8";

	Catalog     = "1782-JDB8";



[IO_Info]

	Default     = 0X0003;		$Default to polled connection

	PollInfo= 0x000F,1,1;

	StrobeInfo= 0x000F,1,2;

	COSInfo=0x0007,1,3;

	CyclicInfo=0x000B,1,3;

	

	Input1= 

		1,

		8,

		0x000F,

		"JDB8 input",

		6,

		"20 4 24 3 30 3",

		"Return all enabled inputs";

	Output1= 

		1,

		8,

		0x0001,

		"JDB8 Poll outputs",

		6,

		"20 4 24 3 30 3",

		"Send out all enabled outputs";

	Output2=

		1,

		1,

		0x0002,

		"Bit Strobe out",

		6,

		"20 4 24 3 30 3",

		"Send out first channel if enabled";	

	Output3=

		0,

		0,

		0x000C,

		"Empty Out",

		0,

		"",

		"No outputs for COS/Cyclic";



[ParamClass]

	MaxInst=6;

	Descriptor=9;

	CfgAssembly=0;



[Params]



	Param1 = 

		0,

        	6,"20 0F 24 1 30 1",  $class 15, inst. 1, att 1

		0x02,

		24,1,			  $8-bit byte

		"Discrete Output Enable",

		"",			  $No Units	

		"Bitmask to enable outputs.",

		0,0xff,0,

		 , , , , ;		  $Unused param



	Param2 = 

		0,

        	6,"20 0F 24 2 30 1",  $class 15, inst. 2, att 1

		0x02,

		24,1,			  $8 bit byte

		"COS Enable",

		"",

		"Bitmask to enable COS on corresponding inputs.",

		0,0xff,0,

		 , , , , ;



	Param3 = 

		0,

        	6,"20 0F 24 3 30 1",  $class 15, inst. 3, att 1

		0x02,

		24,1,			  $8 bit byte

		"Output Fault Action",

		"",

		"0 = Output Fault Value, 1 = Hold Last State",

		0,0xff,0,

		 , , , , ;



	Param4 = 

		0,

        	6,"20 0F 24 4 30 1",  $class 15, inst. 4, att 1

		0x02,

		24,1,			  $8 bit byte

		"Output Fault Value",

		"",

		"0 = Off, 1 = On",

		0,0xff,0,

		 , , , , ;



	Param5 = 

		0,

        	6,"20 0F 24 5 30 1",  $class 15, inst. 5, att 1

		0x02,

		24,1,			  $8 bit byte

		"Output Idle Action",

		"",

		"0 = Idle Value, 1 = Hold Last State",

		0,0xff,0,

		 , , , , ;



	Param6 = 

		0,

        	6,"20 0F 24 6 30 1",  $class 15, inst. 6, att 1

		0x02,

		24,1,			  $8 bit byte

		"Idle Value",

		"",

		"0 = Off, 1 = On",

		0,0xff,0,

		 , , , , ;



		

[EnumPar]

	Param1 = 

		"Channel 0",

		"Channel 1",

		"Channel 2",

		"Channel 3",

		"Channel 4",

		"Channel 5",

		"Channel 6",

		"Channel 7";

	Param2 = 

		"Channel 0",

		"Channel 1",

		"Channel 2",

		"Channel 3",

		"Channel 4",

		"Channel 5",

		"Channel 6",

		"Channel 7";

	Param3 = 

		"Channel 0",

		"Channel 1",

		"Channel 2",

		"Channel 3",

		"Channel 4",

		"Channel 5",

		"Channel 6",

		"Channel 7";

	Param4 = 

		"Channel 0",

		"Channel 1",

		"Channel 2",

		"Channel 3",

		"Channel 4",

		"Channel 5",

		"Channel 6",

		"Channel 7";

	Param5 = 

		"Channel 0",

		"Channel 1",

		"Channel 2",

		"Channel 3",

		"Channel 4",

		"Channel 5",

		"Channel 6",

		"Channel 7";

	Param6 = 

		"Channel 0",

		"Channel 1",

		"Channel 2",

		"Channel 3",

		"Channel 4",

		"Channel 5",

		"Channel 6",

		"Channel 7";



[Groups]