$ DeviceNet Electronic Data Sheet for JDB4
$
$ Created by: MM
$ Modified by: Fred Billock
$ Modified 2/5/02, Version 3.01 - support product rev 3.001
$ Rev 3.03, 2/19/2002, fjb - support product revision 3.003
$ Verified with EDS Checker version 2.12, 2/19/2002


[File]
	DescText = "1782 JDB4 EDS";
	CreateDate = 03-17-1998;
	CreateTime = 12:00:00;
	ModDate = 02-19-2002;
	ModTime = 16:21:00;
	Revision = 3.03;

[Device]
	VendCode    = 9;                                  $ Vendor Code
	ProdType    = 7;                                  $ Product Type
	ProdCode    = 100;                                $ Product Code

	MajRev      = 3;                                  $ Major Rev
	MinRev      = 003;                               $ Minor Rev
	VendName    = "Western Reserve Controls Inc.";
	ProdTypeStr = "General Purpose Discrete I/O";
	ProdName    = "1782-JDB4";
	Catalog     = "1782-JDB4";

[IO_Info]
	Default     = 0X0003;		$Default to polled connection
	PollInfo= 0x000F,1,1;
	StrobeInfo= 0x000F,1,2;
	COSInfo=0x0007,1,0;
	CyclicInfo=0x000B,1,0;
	
	Input1= 
		1,
		4,
		0x000F,
		"JDB4 input",
		6,
		"20 04 24 03 30 03",
		"Return all enabled inputs";
	Output1= 
		1,
		4,
		0x0001,
		"JDB4 Poll outputs",
		6,
		"20 04 24 03 30 03",
		"Send out all enabled outputs";
	Output2=
		1,
		1,
		0x0002,
		"Bit Strobe out",
		6,
		"20 04 24 03 30 03",
		"Send out first channel if enabled";	


[ParamClass]
	MaxInst=8;
	Descriptor=9;
	CfgAssembly=0;

[Params]

	Param1 = 
		0,
        	6,"20 0F 24 01 30 01",  $class 15, inst. 1, att 1
		0x02,
		24,1,			  $8-bit byte
		"Discrete Output Enable",
		"",			  $No Units	
		"Bitmask to enable outputs.",
		0,0x0f,0,
		 , , , , , , , , ;		  $Unused param 13-21

	Param2 = 
		0,
        	6,"20 0F 24 02 30 01",  $class 15, inst. 2, att 1
		0x02,
		24,1,			  $8 bit byte
		"COS Enable",
		"",
		"Bitmask to enable COS on corresponding inputs.",
		0,0x0f,0,
		 , , , , , , , , ;		  $Unused param 13-21

	Param3 = 
		0,
        	6,"20 0F 24 03 30 01",  $class 15, inst. 3, att 1
		0x02,
		24,1,			  $8 bit byte
		"Output Fault Action",
		"",
		"0 = Output Fault Value, 1 = Hold Last State",
		0,0x0f,0,
		 , , , , , , , , ;		  $Unused param 13-21

	Param4 = 
		0,
        	6,"20 0F 24 04 30 01",  $class 15, inst. 4, att 1
		0x02,
		24,1,			  $8 bit byte
		"Output Fault Value",
		"",
		"0 = Off, 1 = On",
		0,0x0f,0,
		 , , , , , , , , ;		  $Unused param 13-21

	Param5 = 
		0,
        	6,"20 0F 24 05 30 01",  $class 15, inst. 5, att 1
		0x02,
		24,1,			  $8 bit byte
		"Output Idle Action",
		"",
		"0 = Idle Value, 1 = Hold Last State",
		0,0x0f,0,
		 , , , , , , , , ;		  $Unused param 13-21

	Param6 = 
		0,
        	6,"20 0F 24 06 30 01",  $class 15, inst. 6, att 1
		0x02,
		24,1,			  $8 bit byte
		"Idle Value",
		"",
		"0 = Off, 1 = On",
		0,0x0f,0,
		 , , , , , , , , ;		  $Unused param 13-21

	Param7 = 
		0,
        6,"20 04 24 03 30 03",  $class 15, inst. 3, att 1 (4 DIs in 1 byte)
		0x00,
		24,1,			  $8 bit byte
		"Input State",
		"",
		"0 = Off, 1 = On",
		0,0x0f,0,
		 , , , , , , , , ;		  $Unused param 13-21

	Param8 = 
		0,
        6,"20 04 24 21 30 03",  $class 15, inst. 33, att (4 DOs in 1 byte)
		0x00,
		24,1,			  $8 bit byte
		"Output State",
		"",
		"0 = Off, 1 = On",
		0,0x0f,0,
		 , , , , , , , , ;		  $Unused param 13-21


$baudrate is switch settable
		
[EnumPar]
	Param1 = 
		"Channel 0",
		"Channel 1",
		"Channel 2",
		"Channel 3",
		"Not used", "Not used", "Not used", "Not used";
	Param2 = 
		"Channel 0",
		"Channel 1",
		"Channel 2",
		"Channel 3",
		"Not used", "Not used", "Not used", "Not used";
	Param3 = 
		"Channel 0",
		"Channel 1",
		"Channel 2",
		"Channel 3",
		"Not used", "Not used", "Not used", "Not used";
	Param4 = 
		"Channel 0",
		"Channel 1",
		"Channel 2",
		"Channel 3",
		"Not used", "Not used", "Not used", "Not used";
	Param5 = 
		"Channel 0",
		"Channel 1",
		"Channel 2",
		"Channel 3",
		"Not used", "Not used", "Not used", "Not used";
	Param6 = 
		"Channel 0",
		"Channel 1",
		"Channel 2",
		"Channel 3",
		"Not used", "Not used", "Not used", "Not used";

$[Groups]