$ DeviceNet Electronic Data Sheet for 1782-JDM
$
$
$ Tested against:	EDSChecker, version 2.02, 7/2/2000

[File]
    DescText = "1782-JDM EDS";
    CreateDate = 05-05-2000;
    CreateTime = 17:00:00;
    ModDate = 07-03-2000;
    ModTime = 17:27:00;
    Revision = 1.00;

[Device]
    VendCode    = 9;                                  $ Vendor Code
    VendName    = "WRC - Western Reserve Controls, Inc.";
    ProdType    = 0x0C;                                  $ Product Type 
    ProdTypeStr = "Communications Adapter"; 
    ProdCode    = 711;                                $ Product Code
    MajRev      = 1;                                  $ Major Rev
    MinRev      = 01;           $ Minor Rev
    ProdName    = "1782-JDM";       $ 
    Catalog     = "1782-JDM";

[IO_Info]
    Default     = 0x0001;            $Default to polled connection
    PollInfo    = 0x0001,1,1;        $Poll can be allocated with all cnxn
    
    Input1= 
        11, $ connection size: 6 bytes (mb addr, <=10 data value words) 
        0,  $ 0 = all bits significant
        0x0001,                 $ POLL connection
        "JDC-DELTA Poll Input",
        6,      $ connection path size in bytes
        "20 4 24 3 30 3",   $ connection path 
        "Return all selected VFD 21xx Registers data ";

    Output1= 
        5, $ connection size: 6 bytes (mb addr, data addr word, data value word) 
        8,
        0x0001,
        "JDM Poll Output",
        6,      $ connection path size in bytes
        "20 4 24 3 30 3",
        "Send output value to specified VFD register";

[ParamClass]
	MaxInst=11;
	Descriptor=9;
	CfgAssembly=0;


[Params]

	Param1 = 
		0,
        		6,"20 15 24 1 30 1",  $class 15, inst. 1, att 1 $ MUST UPDATE THIS FIELD
		0x02,				$ MUST UPDATE THIS FIELD
		24,1,			  $8-bit byte
		"Modbus Protocol",
		"",			  $No Units	
		"ASCII or RTU Modbus Protocol",
		0,1,0,
		 , , , , , , , , ;		  $Unused params fields 13-21

	Param2 = 
		0,
	        	6,"20 15 24 2 30 1",  $class 15, inst. 2, att 1 $ MUST UPDATE THIS FIELD
		0x00, 
		24,1,			  $8 bit byte
		"Rx Character Length",
		"",
		"Max Number of bytes of data received from the Modbus device",
		1,96,48,
		 , , , , , , , , ;		  $Unused params fields 13-21

	Param3 = 
		0,
        		6,"20 15 24 3 30 1",  $class 15, inst. 2, att 1 $ MUST UPDATE THIS FIELD
		0x00, 
		24,1,			  $8 bit byte
		"Tx Character Length",
		"",
		"Max Number of bytes of data transmitted to the Modbus device",
		1,96,48,
		 , , , , , , , , ;		  $Unused params fields 13-21

	Param4 = 
		0,
	        	6,"20 15 24 2 30 1",  $class 15, inst. 2, att 1 $ MUST UPDATE THIS FIELD
		0x02, $ MUST UPDATE THIS FIELD
		24,1,			  $8 bit byte
		"Baudrate",
		"",
		"Modbus Link Baudrate",
		0,7,0,
		 , , , , , , , , ;		  $Unused params fields 13-21

	Param5 =  	$Not currently implemented
		0,
	        	6,"20 15 24 3 30 1",  $class 15, inst. 2, att 1 $ MUST UPDATE THIS FIELD
		0x02, $ MUST UPDATE THIS FIELD
		24,1,			  $8 bit byte
		"DeviceNet Baud Rate",
		"",
		"DeviceNet Baud Rate - 3 = autobaud (default)",
		0,3,3,
		 , , , , , , , , ;		  $Unused params fields 13-21

	Param6 = 
		0,
        		6,"20 15 24 4 30 1",  $class 15, inst. 2, att 1 $ MUST UPDATE THIS FIELD
		0x00, $ MUST UPDATE THIS FIELD
		24,1,			  $8 bit byte
		"Modbus Time-out",
		"10ms",
		"Modbus response wait time (10ms ticks) before fault (0=none)",
		0,255,0,
		 , , , , , , , , ;		  $Unused params fields 13-21

	Param7 = 	$Not currently implemented
		0,
	        	6,"20 15 24 5 30 1",  $class 15, inst. 2, att 1 $ MUST UPDATE THIS FIELD
		0x02, $ MUST UPDATE THIS FIELD
		24,1,			  $8 bit byte
		"Fault action",
		"",
		"Action to take if a DeviceNet fault occurs",
		0, 1, 0,
		 , , , , , , , , ;		  $Unused params fields 13-21

	Param8 =  	$Not currently implemented
		0,
        		6,"20 15 24 6 30 1",  $class 15, inst. 2, att 1 $ MUST UPDATE THIS FIELD
		0x00, $ MUST UPDATE THIS FIELD
		24,1,			  $8 bit byte
		"Fault string",
		"",
		"String sent to Drive after fault (if fault action = 1)",
		 , , , , , , , , ;		  $Unused params fields 13-21

	Param9 =  	$Not currently implemented
		0,
	        	6,"20 15 24 7 30 1",  $class 15, inst. 2, att 1 $ MUST UPDATE THIS FIELD
		0x02, $ MUST UPDATE THIS FIELD
		24,1,			  $8 bit byte
		"Idle action",
		"",
		"Action to take if a DNet idle command is sent to JDM",
		0, 1, 0,
		 , , , , , , , , ;		  $Unused params fields 13-21

	Param10 =  	$Not currently implemented
		0,
        		6,"20 15 24 8 30 1",  $class 15, inst. 2, att 1 $ MUST UPDATE THIS FIELD
		0x00, $ MUST UPDATE THIS FIELD
		24,1,			  $8 bit byte
		"Idle string",
		"",
		"String sent Drive upon DNet Idle cmd (if idle action=1)",
		 , , , , , , , , ;		  $Unused params fields 13-21

	Param11 =  	$Not currently implemented
		0,
	        	6,"20 15 24 9 30 1",  $class 15, inst. 2, att 1 $ MUST UPDATE THIS FIELD
		0x02, $ MUST UPDATE THIS FIELD
		24,1,			  $8 bit byte
		"Serial Comm Format",
		"",
		"Serial link framing data: data bits, parity, stop bits",
		0, 5, 0,
		 , , , , , , , , ;		  $Unused params fields 13-21

 
[EnumPar]
            
	Param1 = 
		"ASCII Mode",
		"RTU Mode";

	Param4 = 
		"9600 baud", "300 baud", "600 baud", "1200 baud", "2400 baud", 
		"4800 baud", "19.2k baud", "38.4k baud";

	Param5 = 
		"125k baud",
		"250k baud",
		"500k baud",
		"Autobaud";

	Param7 = 
		"No action upon fault",
		"Send defined string to Drive upon fault";

	Param9 = 
		"No action upon Idle Command",
		"Send defined string to Drive upon Idle Command";

	Param11 = 
		"7 data bits, No parity, 2 stop bits",
		"7 data bits, Odd parity, 1 stop bit",
		"7 data bits, Even parity, 1 stop bit",
		"8 data bits, No parity, 2 stop bits",
		"8 data bits, Odd parity, 1 stop bit",
		"8 data bits, Even parity, 1 stop bit";



[Groups]