SOFTWARE INSTALLATION

This package uses compression schemes to simplify installation and
to permit the use of a single diskette.  Both Windows and DOS
installation programs are provided on your master disk.  These
programs will copy and expand the software package onto your
floppy- or hard-drive.  To begin the installation process, place
the softare master diskette in a floppy drive and execute the
SETUP.EXE program.


DOS USERS

If you are at a DOS command prompt, you can simply type "a:setup [ENTER]"
(replacing 'a' with the drive letter that contains the master diskette).
This will start the DOS installation program.

The DOS installation program will ask you for various installation
options, and will provide default settings.  These default settings may
be selected (by pressing ENTER) if they will work with your particular
application and system setup, or you can respond to the questions with
appropriate answers as needed.

When all of the installation options have been set, the program will
expand the necessary files into the destination you have selected.  Once
this process is complete, please put your Master Diskette in a safe
place as backup.


WINDOWS USERS (incl. 3.1, 3.11, 95, NT)

Replace 'a' in the examples below with the drive letter that contains the
master diskette.

In Windows 3.x, select File|Run from the Program Manager and type "a:setup"
and press ENTER.

In Windows 95, select Start|Run... from the Explorer's task bar,
and type "a:setup" then press ENTER.

If you are in a DOS window, type "a:setup" followed by the ENTER key.

Once the program has started, the default installation options will have
already been selected.  The source drive is automatically detected and the
default destination directory is displayed.  If you would rather install
the software into a different directory, you may select a new one using the
directory structure shown, or by simply typing a new path in the input box.
When you are satisfied with the settings, click on Install to start the
installation process.

This will complete the installation process.


TROUBLESHOOTING

If you have problems with either of the installation programs, you can
create the software package at the destination yourself.  First, create the
directory where you would like the package to be installed.  Then copy
the .EX_ file to the directory.  Now change the extension from .EX_ to .EXE
and execute the resulting file with the "-d" command line option.

For example, if the file was FILENAME.EX_, you would copy this file to
the destination directory, rename it to FILENAME.EXE, and run it by typing
"FILENAME -d"  This will decompress the files into their correct paths.